Komatsu — EVERY 2000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE 4 - 72 CLEAN HYDRAULIC TANK STRAINE When changing t he oil in the hydraulic tan k, drain th e oil from the tank and clean the st 1. Loosen the m ounting bolts, t hen remo ve cover ( 2. Loosen bolts (2), then remov e holder (3 ) togethe r with strainer (4 ) from the h ydraulic 3. Loosen nut (5 ), then r emove strainer ( 4). 4. Remove any dirt from straine r (4) , then wash in cl ean diesel oil or flushing oil . is broken, replace it with a new part. r (4) to holder (3), then tighten nut (5). rque: 59 to 74 Nm (6.0 to 7.5 kgm, 43.4 to 54.2 lbft) (3). ng (6) of the holder with a new part. If strainer (4) is broke n, replace i t with a new par 5.

Install straine r (4) to h older ( 3), t hen tig hten nut Tightening to Tightening to rque: 59 6. Install holder Replace O-ri ng (6) of the holder with a new part