. OPERATION EXPLANATION OF COMPONENTS CAUTION REMARK Using the travel speed limit dial to set the travel speed makes it easy to carry out operations approaching dump trucks with the accelerator pedal kept depressed. 3 - 29 LAMP SW ITCH switch (2) to turn on the head lamps, side clearance il lamps, and instrument panel lighting. a): OFF b): Side clearance lamps, tail lamps, and instrument panel light up c): Head lamps light up Use this lamps, ta il lamps , and ins trument panel lightin Position ( a): OFF Position ( b): Side pane l light up Position ( c):
Hea d lamps l TRAVEL SPEED LIMIT DIA L he maximum travel speed as desired Use this dial (3) to set t according to the tr ansmiss ion speed range and position of the dial. When th e travel speed is m ore than 1.5 km/h (0.9 MPH), the travel speed limit is a ctuated only when the machine is traveli ng forward. At speeds of less than 1.5 km/h (0.9 MPH), the system auto matically switches to operatio n of the drive forc e limit. Operate the trave l speed li mit ON-OFF switch to a ctuate the travelspeed limit on ly when i t is neede d. When tr aveling i n load-and-carry operations, use the RPM SET method to main tain constant spee d in order to reduce fu el consumption.
The trav el speed limit is ac tuated when the trans mission cut-off switch is ON. When the travel s peed lim it ON-OFF switch is at the ON position, travel spe ed limit ON-OFF indicator lamp (A) If i ndicato does not The maxi mum travel spee ds according to the transmission speed range and travel spee d limit dial position are as follows. Transmission speed rang e Maximum travel speed (km/h (MPH) 1st 1.5 to 7.0 (0.7 to 4.4) 2nd 1.5 to 12.0 (0.7 to 7.5)