PARTS CATALOG GUIDE V. HOW TO PRINT A CATALOG Your Custom Parts Catalog can be printed on any Windows compatible printer, capable of printing color or grey scale. It is recommended that you print the catalog in color so as to not lose Reference Figure and Non-Illustrated Reference Figure color indicators. To print your catalog, simply click on the Print button on the Navigation bar: Print Button After clicking on the Print button a Print Dialog will be displayed on the screen. The actual dialog look will vary, depending on which printer you are using. A typical print dialog is shown below:
At this point you either click the All button to print the entire catalog or enter the specific pages you wish to print in the From and To edit lines. In the example shown, the user has elected to print pages 1 to 34. After selecting the pages to print, press the Print button If you have access to a color or grey scale printer with duplex capability, you can print your catalog two sides to a page. This makes a great catalog, and reduces the number of catalog pages by one-half. When printing on a duplex (two sides to a page) printer, be sure that the printer automatically inserts gutters for left and right pages, or can be set to provide page gutters.
Even page numbers are left side pages and odd page numbers are right side pages. When printing a catalog it is easier if you print on paper that is prepunched for the type of binder the manual will be placed into. Prepunched paper is available through your local paper supplier. Page No. 32 COPYRIGHT© 2011INTERNATIONAL TRUCK AND ENGINE CORP. COPYRIGHT© 2011INTERNATIONAL TRUCK AND ENGINE CORP.