Perkins — Perkins 1204F-E44TA and 1204F-E44TTA Industrial Engine Systems Operation Manual

Air Inlet and Exhaust System 100 UENR4490-01 Note: Dispose of the DEF removed as per local regulations and mandates. i06887136 Aftertreatment SCR System Dosing - Test Required Tooling Table 9 Test Procedure 1. Remove the Diesel Exhaust Fluid (DEF) injector from the Clean Emissions Module (CEM). Refer to Disassembly and Assembly, “DEF Injector and Mounting - Remove and Install” for the correct procedure. Note: Leave the diesel exhaust fluid lines, and the electrical connector connected to the DEF injector. Illustration 93 g03370910 A typical example of Tooling (A) 2. Assemble the DEF collection container from Tooling (A). Connect the DEF injector to the lid for the collection container. Note:

Tooling (B) may be required to allow the DEF injector to be moved to a convenient location for testing. 3. Turn the key switch to the ON position. 4. Connect to the electronic service tool. Illustration 92 g03370846 DEF injector bolted to measuring container lid Required Tools Tool Part Number Part Description Qty A T402192 Container 1 B T401199 Test Kit (DEF) 1