Perkins — Perkins 1204F-E44TA and 1204F-E44TTA Industrial Engine Systems Operation Manual

UENR4490-01 105 Air Inlet and Exhaust System 8. Reinstall the manifold (DEF heater) into the DEF tank. Refer to Disassembly and Assembly, “Manifold (DEF Heater) - Remove and Install” for the correct procedure. Illustration 100 g03710738 Typical example (8) DEF pump (9) DEF filter cap 9. Replace the Diesel Exhaust Fluid (DEF) filter. Refer to Operation and Maintenance Manual for the correct procedure. Illustration 99 g03710736 Typical example 10. Flush the DEF suction and backflow lines into a suitable container using distilled water. The minimum quantity of distilled water that is required is 7.57 L (2 US gal). (2) Manifold (DEF heater) (7) Filter 5.

Remove the filter from the manifold (DEF heater). Refer to Disassembly and Assembly, “Manifold (DEF Heater) - Remove and Install” for the correct procedure. 11. Reconnect all lines to the DEF pump and to the manifold (DEF heater). Refer to Disassembly and Assembly for the correct procedures. 6. Flush the DEF suction and backflow connections on the manifold (DEF heater) using distilled water. Install a new filter onto the manifold (DEF heater). Refer to Disassembly and Assembly, “Manifold (DEF Heater) - Remove and Install” for the correct procedure. 12. Fill the DEF tank to the appropriate level with new DEF. Operation and Maintenance Manual for more information.

The new DEF must meet ISO 22241 standards. 13. Start the engine. Refer to Operation and Maintenance Manual for the correct procedure. 7. Position the suitable container under the DEF tank drain and flush the DEF tank thoroughly. 14. Connect to the electronic service tool.