Perkins — Perkins 1204F-E44TA and 1204F-E44TTA Industrial Engine Systems Operation Manual

Air Inlet and Exhaust System 104 UENR4490-01 10. Use the electronic service tool to perform the Aftertreatment System Functional Test . i05934698 Diesel Exhaust Fluid Tank - Flush Required Tools Table 10 Flushing Procedure 1. Turn the key switch to the OFF position. The key switch must be OFF to allow the DEF pump to purge, ensuring the system is free of pressurized DEF. Note: In certain circumstances, allow for a maximum of 15 minutes after turning the key switch to the OFF position before turning the battery disconnect switch to the OFF position. Refer to Operation and Maintenance Manual, “Battery Disconnect Switch” for more information. 2. Drain the existing DEF from the DEF tank.

Illustration 98 g03708638 Typical example Note: All DEF drained or flushed during this procedure must be disposed of as per local regulations and mandates. (1) DEF suction line (2) Manifold (DEF heater) (3) Harness assembly (4) DEF backflow line (5) Coolant supply to DEF pump (6) Coolant supply to manifold (DEF heater) 3. Drain the engine coolant to an appropriate level that will allow the coolant lines to be removed from the tank header. Refer to Operation and Maintenance Manual for more information. 4. Remove the manifold (DEF heater) from the DEF tank. Refer to Disassembly and Assembly, “Manifold (DEF Heater) - Remove and Install” for the correct procedure.

Required Tools Tool Part Number Part Description Qty A - Plugs 2