Perkins — Perkins 1204F-E44TA and 1204F-E44TTA Industrial Engine Systems Operation Manual

Engine Operation 32 UENR4490-01 Once the engine has stopped, the DEF pump will continue flowing in cooling mode to keep the DEF injector cool. Then the DEF pump will proceed to a purge mode. The DEF injector will remain closed. The DEF pump will reverse the flow of the pump and purge the supply, pressure, and return line. This reversed flow will route any remaining DEF fluid back to the tank. DEF does degrade over time at elevated temperatures. Due to freezing risk, the tank, pump, and lines must be heated and designed to contain frozen DEF. DEF Tank Header Refer to Operation and Maintenance Manual for the correct procedure to replace the DEF filter.

Electric Components of the DEF System The electric components of the DEF system consist of the following components: Coolant Diverter Valve Controls coolant flow to the tank and DEF pump. Dosing Control Unit (DCU) This Dosing Control Unit (DCU) is an ECM that controls all the electrical components in the DEF system. While an ECM, this dosing control module is referred to as the DCU. The DCU receives signals from the engine Electronic Control Module (ECM). Heated Lines The heated lines are electrically heated lines that will turn on any time the ambient temperature is cold. These lines will thaw frozen DEF after starting in cold ambient temperatures.

The heated lines will also stay heated during operation to prevent any freezing during operation. DEF Level Sensor The level sensor will measure the amount of DEF in the tank. The system uses an ultrasonic level sensor to determine the amount of DEF in the DEF tank. To measure the level of DEF, the sensor measures the distance to the surface of the fluid. The sensor provides a signal to the DCU that will be converted into a DEF Level Percentage . DEF Tank Temperature Sensor This sensor is at the bottom of the tank and is integrated within the DEF Level Sensor. DEF Tank Illustration 26 g03708818 Typical example The DEF tank stores the DEF.

The size of the DEF tank will depend on the application. (1) Coolant tubes (2) DEF pickup tube (3) DEF tank header filter (4) DEF tank temperature sensor, level sensor, and quality sensor The DEF solution is made of 32.5 percent urea solution and 67.5 percent deionized water. Urea is a compound of nitrogen that turns to ammonia when heated. The DEF tank header is located in the DEF tank. The tank header consists of several parts and performs the following functions: Ensure that the correct specification of DEF is used. Refer to Operation and Maintenance Manual for more information. Coolant Tubes