Engine Operation 42 UENR4490-01 Typical example (1) In-line fuel filter (2) Electric transfer pump (3) Primary fuel filter (4) ECM that is fuel cooled. (5) Secondary fuel filter (6) Fuel Injection Pump (7) Inlet pressure regulator (8) Fuel manifold (rail) (9) Pressure relief valve (10) Electronic unit injector (11) Fuel cooler (optional) (A) Fuel tank Fuel is drawn from the fuel tank through an in-line fuel filter to an external electric transfer pump. The fuel then flows to the 10 micron primary fuel filter and a water separator. The fuel may flow to a fuel cooled ECM. The fuel then flows to a 4 micron secondary fuel filter.
The fuel flows from the secondary fuel filter to a pressure regulator. A pressure regulator that is installed in the low-pressure fuel system controls the fuel pressure to the fuel injection pump. The pressure regulator regulates the fuel at a pressure of 150 kPa (22 psi) when the engine is at idle speed. From the pressure regulator, the fuel flows to the fuel injection pump. The fuel is pumped at an increased pressure of 200 MPa (29000 psi) to the fuel manifold (rail). Fuel that has too high a pressure from the fuel manifold (rail) returns through the pressure relief valve to the return line. Fuel that is leak off from the electronic unit injectors flows to the return line.
The fuel may then flow through an optional fuel cooler on the way back to the fuel tank.