Perkins — Perkins 1204F-E44TA and 1204F-E44TTA Industrial Engine Systems Operation Manual

Engine Operation 48 UENR4490-01 Fuel Manifold The electronic control system has the following components: ECM Pressure sensor Temperature sensors Crankshaft speed/timing sensor Camshaft speed/timing sensor The suction control valve for the fuel injection pump Wastegate solenoid Electronic unit injectors Soot sensors (if equipped) Valve for the NOx Reduction System (NRS) Illustration 40 g02149309 Typical example The fuel manifold (2) stores high-pressure fuel from the fuel injection pump. The high-pressure fuel will flow to the injectors. The fuel pressure sensor (1) measures the fuel pressure in the fuel manifold (3).

The pressure relief valve (3) will prevent the fuel pressure from getting too high. The fuel pressure sensor must be replaced with the fuel manifold (rail). The pressure relief valve can be serviced as a separate component. i05934618 Electronic Control System Introduction The engine is designed for electronic control. The engine has an Electronic Control Module (ECM), a fuel injection pump and electronic unit injectors. All of these items are electronically controlled. There are also a number of engine sensors. The engine is equipped with an electronically controlled wastegate system for the turbocharger.

The ECM controls the engine operating parameters through the software within the ECM and the inputs from the various sensors. The software contains parameters that control the engine operation. The parameters include all of the operating maps and customer-selected parameters.