Komatsu — 21.1 INTRODUCTION OF NECESSARY TOOLS

21. STANDARD TIGHTENING TORQUES FOR BOLTS AND 21.1 INTRODUCTION OF NECESSARY TOOLS The following tools are needed when carrying out maintenance. No. Name of tool Part No.

Remarks 1 Wrench set 09000-30006 Applicable width across flats (S, - S,) 13 mm - 17 mm, 19 mm - 22 mm ‘S2 24 mm - 27 mm, 30 mm - 32 mm 8mm-lOmm,12mm-14mm 2 Screwdriver 09033-00190 Interchangeable fiat-head and cross-head type 3 Socket wrench 09020-10285 Applicable width across flats set IO mm, 13 mm, 14 mm, 17 mm, 19 mm, 22 mm, 24 mm Extension, Handle 4 Socket 09021-03653 Applicable width across flats 36 mm for mounting trunnion 5 Handle 09024-00300 6 Filter wrench 09019-08035 For filter cartridges 7 Socket 09084-01422 For corrosion resistor (D65P, D65EX.

D65PX) 8 Grease pump 07952-70002 For greasing work 9 Grease cartridge 07950-90403 (Lithium base grease, 400 g) If any of the above tools are broken, please order them from your Komatsu distributor. When not using the tools, always put them in the tool box on the inside of the battery inspec- tion cover on the left side of the machine. 3-l 4