22. PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS To ensure safety at all times when operating or driving the machine, the user of the ma- chine must always carry out periodic maintenance. In addition, to further improve safety, the user should also carry out periodic replacement of the parts given in the table. These parts are particularly closely connected to safety and fire prevention. With these parts, the material changes as time passed, or they easily wear or deteriorate. However, it is difficult to judge the condition of the parts simply by periodic maintenance, so they should always be replaced after a fixed time has passed, regardless of their condition.
This is necessary to ensure that they always maintain their function completely. However, if these parts show any abnormality before the replacement interval has passed, they should be repaired or replaced immediately. If the hose clamps show any deterioration, such as deformation or cracking, replace the clamps at the same as the hoses. When replacing the hoses, always replace the O-rings, gaskets, and other such parts at the same time. Ask your Komatsu distributor to replace the critical parts. . D65E, P-12 No.
Safety critical parts for periodic replacement I I Q’w Replacement interval CC 1 Fuel h ose (fuel tank - injection pump) II 1 Fuel hose (injection pump - fuel filter) I I 2 Fuel return hose (injection pump - fuel tank) I I 1 CC IF I t ue re urn hose (injection nozzle - fuel tank) II 1 Hose (power train strainer - power train pump) II 1 8 Hose (power train pump - power train filter) II 1 Hose (power train filter - transmission case) ED Hose (transmission case - steering relief valve) 1 @ Hose (power train lubrication pump - steering case) 1 Every 2 years or 4000 hours, whichever comes sooner 63 Hose (scavenging pump - steering case) 1 0 Hose (torque converter case -transmission oil cooler) 1 0 Hose (trasmission oil cooler - transmission case) 1 0 Brake pressure detection hose 2 Steering clutch pressure detection hose I I 2 0 IT ransmission modulation pressure detection hose I I 1 Torque converter inlet port pressure detection hose I I 1 Torque converter outlet port pressure detection hose II 1 Seat belt I I Replace every 3 years 3-l 6