23.
MAINTENANCE SCHEDULE CHART 23.1 MAINTENANCE SCHEDULE CHART SERVICE ITEM PAGE WHEN REQUIRED Clean inside of cooling system 3-23 Check, clean and replace air cleaner element 3-27 Check track tension 3-29 Check and tighten track shoe bolts 3-31 Check electrical intake air heater 3-31 Reverse and replace the end bits and cutting edges 3-32 Clean, check radiator fins 3-34 Adjust idler clearance 3-35 Adjusting tension of center brace (Power tilt and Power tilt, power pitch dozer only) 3-36 Clean air conditioner air filter (FRESH/RECIRC filter) (Machines equipped with cab) Check, Adjust air conditioner (Machines equipped with cab) 3-38 Grease door hinge (Machines equipped with cab) 3-38 Check door lock striker (Machines equipped with cab) 3-39 Replace door damper (Machines equipped with cab) 3-39 Check window washer fluid level, add fluid (Machines equipped with cab) 3-39 Bleed air from head end of right pitch cylinder (Power tilt, power pitch dozer only) 3-39 Replace wiper blade (Machines equipped with cab) 3-40 Check idler oil level, add oil 3-41 CHECK BEFORE STARTING Check coolant level, add water 3-42 Checking with machine monitor (Monitor panel specification) 3-42 Check fuel level, add fuel (Monitor panel specification) 3-43 Check fuel level, add fuel (Gauge panel specification) Check oil level in engine oil pan, add oil 3-43 3-44 Check oil level in power train case, add oil 3-45 Check brake pedal travel 3-45 Check dust indicator 3-45 Check that lamps light up 3-46 Check horn sound 3-46 Check backup alarm sound 3-46 3-20