11. EXPLANATION OF COMPONENTS 11 .I .2 GAUGE PANEL (GAUGE PANEL SPECIFICATION) 1. SERVICE METER This meter shows the total operation hours of the ma- chine. The service meter advances while the engine is running - even if the machine is not traveling. Set the periodic maintenance intervals using this display. Meter will advance by 1 for each hour of operation regard- less of the engine speed. 2. ENGINE WATER TEMPERATURE GAUGE This gauge indicates the cooling water temperature. When the indicator is in the green range during operation, the water temperature is normal.
If the indicator moves from the green range into the red range during operation, stop the machine immediately, run the engine under no load at a midrange speed, and wait for the indicator to go down to the green range. After starting the engine, warm up it until the indicator moves into the green range. 2-l 0