Komatsu — 11.1.1 MONITOR PANEL

11. EXPLANATION OF COMPONENTS 3. TRANSMISSION OIL TEMPERATURE GAUGE This indicates the temperature of the transmission lubricat- ing oil. When the indicator is in the green range during operation, the oil temperature is normal. If the indicator moves from the green range into the red range during operation, stop the machine, run the engine under no load at a midrange speed, and wait for the indicator to go down to the green range. 4. CHARGE LAMP This lamp indicates malfunction of the alternator. When the starting switch is turned ON, it will light up, but it should go out when the engine speed rises. If the lamp lights up during operation, stop the engine and check the V-belt tension.

If any abnormality is found, see “16. TROUBLESHOOTING”. 5. ENGINE OIL PRESSURE CAUTION LAMP This lamp warns that the engine lubricating oil pressure has dropped. When the starting switch is turned ON, it will light up. When the lamp goes off after the engine is started, the oil pressure is normal. When the lamp lights up during operation, the oil pressure is lower. Immediately stop the engine and look for the cause. For de- tails, see “16. TROUBLESHOOTING”. 6. GLOW SIGNAL This indicates the electrical intake air heater is red-heated. When holding the starting switch key at the HEAT position, this signal glows red after 15 - 45 seconds.

When releasing the key, the key will return to the OFF posi- tion and the signal will go off. Q e +z 2-11