11. EXPLANATION OF COMPONENTS 11 .I .4 HEATER PANEL (MACHINES EQUIPPED WITH CAB, HEATER) For details of handling switches 0 to @ below, see “11.17 HANDLING HEATER”. 1. FRESH/RECIRC SELECTOR LEVER This changes the air intake port used when cooling or heating. l RECIRC ( @j ) uses the air inside the cab. Turn the switch normally to this position when strong cool- ing is needed. In this position, no ventilation or pressurizing is carried out. l FRESH (5) takes in outside air. This is the standard position for cooling and heating. In this position, fresh air is brought in from outside to carry out ventilation. In addition, the inside of the cab is pressurized to prevent the entry of dust. 2.
BLOWER SWITCH This acts as the wind flow control switch and main switch when cooling or heating. l The air flow can be set to three stages: 1 (LOW) -+ 2 (MEDIUM) + 3 (HIGH). l If the switch is set to 0, the power is switched off and the heater stops. 2-14