Komatsu — 11.1.1 MONITOR PANEL

11. EXPLANATION OF COMPONENTS 3. TEMPERATURE CONTROL LEVER This is used to control the temperature for heating. l When the temperature control lever is moved to the right, the temperature of the air coming from the vents becomes lower. l When the temperature control lever is moved to the left, the temperature of the air coming from the vents becomes higher. 4. STARTING SWITCH This switch is used to start the engine. OFF OFF ( @) position: At this position, the starting switch key can be inserted or removed. When the switch is turned to this position, the elec- trical circuits are switched off. Do not the starting switch key at the OFF position while the engine is running. ON position:

In this position, electric current flows in the charging and lamp circuits. Keep the starting switch key at the ON position while the engine is running. START ( 0 ) position: This is the position to start the engine. Hold the key at this position while cranking. Release the key immediately after the engine has been started. The key will return to ON posi- tion when released. 2-15