Komatsu — 11.3 CONTROL LEVERS AND PEDALS

11. EXPLANATION OF COMPONENTS l Counterrotation turn -A WARNING If the steering and directional lever is not operated fully to the forward or reverse position and the lever is operated to turn the machine, the machine may carry out a counterrotation turn, so do not try to turn the machine with the lever partially operated. When carrying out a counterrotation turn, if the load is not equal on the left and right sides, the machine may carry out a pivot turn, so check the ground con- ditions and be careful not to hit any obstacles.

If the steering and directional lever is operated partially in the direction of turn with the lever at the 0 position, the left and right tracks will rotate in opposite directions and the machine will turn ing lever is operated tion turn will increase. smoothly on the spot. If the steer- I fully, the speed of the counterrota- 3. GEAR SHIFT LEVER This lever changes the transmission gear range. There are three ranges, and the gear can be shifted simply by moving the gear shift lever to the desired position. 0 First speed @Second speed @Third speed 4. BRAKE PEDAL A WARNING Do not place your foot on this pedal unnecessarily. This pedal is used when reducing the engine speed.

When switching between forward and reverse, or when stopping the machine, use this pedal to reduce speed. -I Depress the pedal to apply the right and left brakes. 5. DECELERATION PEDAL -A WARNING Do not place your foot on this pedal unnecessarily. When passing over the top of a hill or when a load is dumped over a cliff, the load is suddenly reduced, so there is danger that the travel speed will also in- crease suddenly. To prevent this, depress the deceler- ator pedal to reduce the travel speed. 2-24