11. EXPLANATION OF COMPONENTS 11.14.2 METHOD OF USE Method of setting preset buttons Press power switch 0. The frequency is displayed in dis- play area 0. Use selector button 0 ( A or V) to adjust to the desired frequency. Choose a preset button to use for this station, and keep it pressed for at least 2 seconds to program the button to that frequency. When the sound suddenly disappears and appears again, the button is programmed, and the preset number is shown in display area 0. After programming the button, press the preset button and release it within approx. 2 sec. The station programmed to that button will be selected for reception.
It is possible to program one station for each preset but- ton. Method of manual tuning Press the tuning button lightly to adjust to the desired fre- quency. Each time the button is pressed, the frequency will change by 9 kHz. A button: Select station at higher frequency v button: Select station at lower frequency Method of automatic tuning Keep the tuning button pressed for at least 2 seconds and then release it. When reception from a broadcasting sta- tion is picked up, the selector will automatically stop at that position. When searching for the next station, keep the selector but- ton pressed again for at least 2 seconds. A button: Select station at higher frequency V button:
Select station at lower frequency If the reception is weak, and stations are not found, adjust the frequency manually to select the desired station. 2-35