Komatsu — 11.14.1 EXPLANATION OF PARTS

11. EXPLANATION OF COMPONENTS Adjusting time 1. Keep T.ADJ button 0 pressed, and press H button 0. The hour display will change, so when it reaches the cor- rect hour, release the button. 2. Keep T.ADJ button 0 pressed and press M button 0. The minute display will change, so when it reaches the correct time, release the button. Method of using RESET button If RESET button 0 is pressed at the same time as the time signal or standard time, the display will return immedi- ately to the exact hour (0 hour 00 min). If the display is 01 - 29 min, the display will go back to 0 min. If the display is 30 - 59 min, the display will advance to 0 min.

[Example] IO:29 -f IO:00 (return to exact hour) IO:30 - II:00 (advances to exact hour) 11.14.3 PRECAUTIONS WHEN USING l For safety reasons, when operating keep the sound to a level where you can enjoy the sound but still hear the sound from outside vehicles. l If water gets inside the speaker case or car radio (auto tuning), it may cause a serious problem, so do not let water get on these parts. l Do not wipe the knobs or buttons or any other parts with any solvent such as benzene or thinner. Always wipe with a soft dry cloth (in cases of extreme dirt, use alcohol on the cloth). 11 .I 4.4 SPECIFICATION Tuning method: PLL synthesizer method Reception frequency:

522 kHz - 1629 kHz Intermediate frequency: 450 kHz Rated output: 3 W Max. output: 5 W Voltage: DC26.4V (21.6V, 31.2V) (-) ground Current: Max. 2A Outside dimensions: Width 178 mm, height 50 mm, depth 110 mm Weight: 640 g 2-36