Komatsu — 11.17.2 CLEANING AIR FILTER

11. EXPLANATION OF COMPONENTS 11 .I7 HANDLING HEATER (MACHINES EQUIPPED 0 WITH CAB) 1 11.17.1 METHOD OF OPERATION To heat quickly Set the switches to the position shown in the diagram on the right to carry out heating quickly. FIX& l Set FRESH/RECIRC selector lever 0 and temperature con- trol lever 0 to the position in the diagram on the right. I l Set blower switch 0 to position 3 (HIGH). NOTICE If heating is carried out continuously for a long period with the lever at the RECIRC position, the air inside the cab will become stale, so when the cab is warmed up, always set the FRESH/RECIRC selector lever 0 to the FRESH posi- tion.

In this position, the inside of the cab is pressurized to prevent the entry of dust. Normal use Set each switch to the desired position. 11.17.2 CLEANING AIR FILTER If the air filter for the FRESH or RECIRC air intake becomes clogged, the heating capacity will drop. To prevent this, clean the air filter with compressed air once a week. For details of the cleaning method, see “24.1 WHEN REQUIRED”. 2-47