12. OPERATION 12.2.2 STARTING IN COLD WEATHER 1 Machines equipped with cab (MONITOR PANEL SPECIFICATION) When starting in low temperatures, do as follows. NOTICE Do not keep the starting motor rotating continuously for more than 20 seconds. If the engine fails to start, repeat steps 2 and 3 after waiting for about 2 minutes. Machines equipped with canopy 1. Pull fuel control lever 0 to LOW IDLING and HIGH IDLING. the center position between 2. Insert the key into starting switch 0 and turn the key to the START position. OFF 3. Carry out preheating. There are the following two ways of carrying out preheat- ing. First use the convenient automatic preheating system. 2-59