Komatsu — 12.3.1 NORMAL OPERATION

12. OPERATION 12.3 OPERATIONS AND CHECKS AFTER STARTING ENGINE After starting the engine, do not immediately start oper- ations. First, carry out the following operations and checks. NOTICE Avoid abrupt acceleration until warm-up run is com- pleted. Do not run the engine at low idling or high idling for more than 20 minutes. If it is necessary to run the engine at idling, apply a load or run at a medium speed from time to time. 1 Monitor Dane1 smecification I 12.3.1 NORMAL OPERATION Pull fuel control lever 0 to the center position between LOW IDLING and HIGH IDLING and run the engine at me- dium speed for about 5 minutes with no load.

After warm-up run is completed, check gauges and caution lamps for proper operation. If any abnormality is found, re- pair it. I Continue to run the engine at light load until engine water temperature gauge indicator 0 falls within the white range (monitor panel specification) or the green range (gauge panel specification). Check that there is no abnormal exhaust gas color, noise, or vibration. If any abnormality is found, repair it. 2-64