Komatsu — 12.3.2 WHEN STARTING IN COLD WEATHER

12. OPERATION 123.2 WHEN STARTING IN COLD WEATHER \\V-Y 1. Pull fuel control lever 0 to the center position between LOW IDLING and HIGH IDLING and run the engine at me- dium speed for about IO minutes with no load. 2. Operate blade control lever 0 for 5 minutes to relieve the tilt circuit intermittently, then operate lift + tilt for a further 5 minutes. If the work equipment oil is not sufficiently warmed up, there will be a delay in the response of the work equip- ment and steering. 3. After warm-up run is completed, check gauges and caution lamps for proper operation. If any abnormality is found, re- pair it.

Continue to run the engine at light load until engine water temperature gauge indicator 0 falls within the white range (monitor panel specification) or the green range (gauge panel specification). 4. Check that there is no abnormal exhaust gas color, noise, or vibration. If any abnormality is found, repair it. 2-65