. MAINTENANCE SERVICE PROCEDURE CLEAN INSIDE OF COOLING SYSTEM WARNING The coolant has the important function of preventing corrosion as well as preventing freezing. Even in the areas where freezing is not an issue, the use of antifreeze coolant is essential. Komatsu machines are supplied with Komatsu Supercoolant (AF-NAC). Komatsu Supercoolant (AF-NAC) has excellent anticorrosion, antifreeze and cooling properties and can be used continuously for 2 years or 4000 hours. As a basic rule, we do not recommend the use of any coolant other than Komatsu genuine supercoolant (AF-NAC).
If you use another coolant, it may cause serious problems, such as corrosion of the engine and aluminum parts of the cooling system. To maintain the anticorrosion properties of Supercoolant (AF-NAC), always keep the density of Supercoolant between 30% and 68%. Supercoolant (AF-NAC) is already diluted with distilled water. When using coolant, investigate the lowest temperatures in the past and decide the density for the coolant from the coolant density table below. When actually deciding the density for the coolant, set it for a temperature 10 ° C (18 ° F) lbelow the actual temperature. The coolant density varies according to the ambient temperature, but it must always be a minimum of 30%.
Coolant density table 4 - 28 Immedi ately after t he engine is stopp ed, the engine coolan t is hot and the pressure inside the radiator is high. Removing the cap an d draining th e water under this condition could cau se burns. Allow the engine to cool down , the n turn the cap slowly to relea se the press ure. Start th e engine and flush t he system. When standing up or leaving the operator's seat, set the gear s hift l ever to the N position and set the parking brake switch to th e PARKING position.
For det ails of starti ng the engine, see "OPERATIONS, CH ECKS BEFORE STARTING (PAGE 3-85)" and "STARTING ENGINE (PAGE 3-87)" in the OPERATION secti on of the Operation a nd Maintenanc e Manual When t he undercov er is removed, the re is danger of touch ing the fan. Never g o to the fron t of th e machine w hen the engine is ru Stop the machine o n level ground w hen cleaning or ch anging the coolant. Clean the inside of t he cooling syste m, change the coo lant accordin g to the t able below.
Interv Antifreeze coolant al for cleaning inside of cooling system and changing antifreeze coolant Komatsu supercoolant E (AF-NAC) very two years or every 4000 hours whichever comes first Minimum Temp °C Above -10 -15 -20 -25 -30 -35 -40 -45 -50 °F Above 14 5 -4 -13 -22 -31 -40 -49 -58 Concentration (%) 30 36 41 46 50 54 58 61 64