hyundai — 8067024 pf2510 EN 03 17

Operating & maintenance manual 23 Initial operation 23.1 Delivery receipt of the compaction roller Ascertain the completeness of the delivery (including all accessories and the technical documentation). Make a note of any damage found. Refer to the chapter Note of delivery and verification of inspections for information on the default maintenance intervals (maintenance certificates). 23.1.1 Checking the operating state of the compaction roller Check the following fill levels: Ensure that the following fill levels correspond to the required levels (see Technical Specifications ):

Engine oil level Coolant level Hydraulic oil level Oil level in the drum drive Oil level in the vibration drive Check (correct) the tire inflation pressure Screw connections: Tighten the wheel nuts by means of a torque key (tightening torque: 500 Nm ). Check all screw connections. Check the hydraulic system Check the hydraulic hoses and screw connections for signs of leakage. 101 NOTICE  Make sure all checks and maintenance measures required for the initial operation are carried out in the presence of the customer or his/her staff.  Obtain a written confirmation. NOTICE Inform the customer and his/her staff of the warranty terms as provided in the contract.

As for the liability of the manufacturer, refer to the corresponding section in the operating and maintenance manual. NOTICE  Make sure all checks and maintenance measures required for the initial operation are carried out in the presence of the customer or his/her staff.  Obtain a written confirmation.  Indicate the respective chapters in this manual.