hyundai — 8067024 pf2510 EN 03 17

Operating & maintenance manual Before putting the vehicle into service again: Check the hydraulic oil level. Drain the anti-corrosive oil and fill in new engine oil. Replace the hydraulic oil in case the compaction roller has not been put into operation for more than a year. Remove the anti-corrosion grease. Open the air filter suction hose and the muffler by removing the duct tape and the plastic foil. 22.3 Final shutdown of the compaction roller Ensure that the compaction roller is not put into operation in the period between the shutdown and its disposal! Secure the compaction roller against unauthorized operation by locking the door, the engine hood and the windows.

Take all measures necessary in order to prevent any danger resulting from the machine (see notes on securing the compaction roller against rolling in this manual, for instance). Remove the battery from the vehicle. Eliminate any leakage (engine, tank, hydraulic system) and make sure no consumables or lubricants which might represent a risk to the environment can escape! 100 SAFETY Obligation to inform yourself! Prior to the final shutdown of the compaction roller, inform yourself of all applicable laws, guidelines and directives concerning the shutdown procedure and the disposal and observe them! INSTRUCTIONS NOTICE Environmental protection!

 Dispose of all materials separately and at official and authorized locations!  Oil and fuel may not penetrate the soil, pollute water or leak into the sewer system!  Dispose of all consumables and lubricants separately and in an environmentally friendly way!