hyundai — 8067024 pf2510 EN 03 17

Operating & maintenance manual 9.2.1 Trouble-shooting: Diesel engine start If the diesel engine does not start, make sure that: the parking brake is applied the battery main switch (if installed) is switched on the battery is sufficiently charged there is enough Diesel in the fuel tank the engine compartment is faultless by performing a visual inspection If the problem persists, contact the Hyundai service staff. 9.3 Driving the compaction roller 9.3.1 Forward motion: start Deactivate (i.e. release) the parking brake by means of the switch ( 4 ). The symbol indicating the activation of the parking brake goes out.

Please note that, for safety reasons, after releasing the brake, you need to wait for a few seconds before the joystick can be moved out of its neutral (middle) position. Make sure that the selector switch for setting the type of vibration is in the middle position 0 . Hold on to the steering wheel. Move the joystick ( 1 ) forward. The symbol indicating forward motion lights up on the dashboard. The compaction roller starts to move forward. 1 4 Fig. 42 Forward motion 43 WARNING A warming-up phase of 10 minutes with the Diesel engine running at idle speed is required prior to driving the compaction roller or to carrying out any movements of the attachments!

The functions of the hydraulic system are not available before the hydraulic oil has sufficiently warmed up! WARNING Risk of injuries! Be sure to fasten the safety belt before starting the Diesel engine! WARNING Risk of accidents and injuries! • Always fasten the safety belt before driving the compaction roller! • Driving the compaction roller with the doors open is strictly prohibited! • You may open the windows before starting. NOTICE The farther you move the joystick forwards, the higher the speed of the compaction roller. As soon as the joystick has reached the end position, maximum speed is set. Setting the joystick to the neutral position “N” causes the compaction roller to stop.