Operating & maintenance manual 9.3.2 Forward motion: stop Stop the forward motion by means of the joystick ( 1 ) or, in the event of an emergency, by pressing the emergency stop pushbutton ( 5 ). Move the joystick back to the neutral position N . The compaction roller stops. Apply the parking brake via switch 4 . The symbol indicating the activation of the parking brake lights up on the dashboard. N 4 4 5 Fig. 43 Stopping forward motion 9.3.3 Reverse motion: start Deactivate (i.e. release) the parking brake by means of the switch ( 4 ). The symbol indicating the activation of the parking brake goes out.
Make sure that the selector switch for setting the type of vibration is in the middle position 0 . Hold on to the steering wheel. Move the joystick ( 1 ) backward. The symbol indicating reverse motion lights up on the dashboard. The compaction roller starts to move backward. 3 1 4 Fig. 44 Reverse motion 44 DANGER In any emergency which requires you to stop the compaction roller at once, press the emergency stop push-button (5). WARNING Risk of accidents! • Prior to any reverse movement of the compaction roller, make sure that your view to the rear is unobstructed! • Before and while driving backwards, always check the area behind you by looking backwards.