Operating & maintenance manual 9.5 Stopping and parking the compaction roller Stopping the Diesel engine: Stop the compaction roller on solid and level ground. In order to stop the compaction roller, set the joystick to the neutral ( N ) position. Actuate the switch ( 1 ) to apply the parking brake. The corresponding symbol lights up on the dashboard. Turn the ignition key counterclockwise into the neutral position and remove it from the ignition lock ( 2 ). Press the locking button ( 4 ) in the right armrest and move it to the rear position in order to get off the vehicle. 2 1 4 Fig.
52 Parking the compaction roller 9.5.1 Leaving the compaction roller After leaving the cab, lock the door ( 13 ) and the engine hood ( 14 ). In addition, use wheel chocks to secure the compaction roller against rolling. 14 13 Fig. 53 Leaving the compaction roller 48 NOTICE Never shut off the Diesel engine while it is running at a high engine speed. Let the Diesel engine idle until a temperature compensation has been established. NOTICE Battery main switch (optional feature) In case your machine is equipped with a battery main switch, after stopping the diesel engine, wait for a minimum of 60 seconds before pulling out the ignition key and switching off the battery main switch.
SAFETY INSTRUCTIONS Obligation to inform yourself! If you intend to park the compaction roller in areas that are part of public road traffic, be sure to observe the applicable regulations, safety guidelines and laws.