Operating & maintenance manual 10 Driving on heavy soils and on slopes 10.1 HA control (Optional feature) The hydraulic HA (rear axle) control can be used to drive the compaction roller on level grounds or on slopes, either with or without vibration. 10.1.1 Overriding the hydraulic HA control In certain situations, e.g. when starting the compaction roller with the rear wheels or the drum sunk into the ground or while driving at a carefully set speed or for driving on slopes, it may be necessary to override the HA control. In order to do so, actuate the switches “Override function Drum” ( 3.2 ), which deactivates the HA control at the roller drum. Rear of the switch pressed down:
HA control off . The corresponding symbol on the dashboard ( 3.21 ) lights up. The maximum driving torque is established at the roller drum. 3.2 3.21 Fig. 54 HA control 49 WARNING Danger due to insufficient stability and lack of propulsion If, even with the override function activated, the required thrust cannot be established, do not continue operation on the slope in question and back up. NOTICE The HA control prevents the drum from spinning on slopes or in heavy terrain.