Operating & maintenance manual 12.3.2 Simple operation: Forward motion (without vibration) Actuate the switch ( 3 ) to deactivate the parking brake. The corresponding symbol on the dashboard is deactivated. Check whether the switch for selecting the type of vibration ( 2.1 ) is set to the middle position ( 0 ) - OFF . Set a high engine speed by means of the buttons on the joystick ( 1 ). Move the joystick ( 1 ) forward. The symbol for forward motion lights up on the dashboard. The compaction roller starts to move forward. 1 3 0 2.1 Fig. 69 Forward motion 12.3.3 Simple operation: Reverse motion (without vibration) Proceed as described above ( Simple operation:
Forward motion (without vibration) , but move the joystick backward instead of forward. 4 The symbol indicating reverse motion ( 4 ) lights up on the dashboard. The compaction roller starts to move backwards. Fig. 70 Reverse motion 60 NOTICE Measures to be taken prior to driving! The compaction roller needs to be ready for operation with the Diesel engine started and running at operating temperature (see chapter Starting, driving and stopping the compaction roller). WARNIN Risk of accidents! G • Prior to any reverse movement of the compaction roller, make sure that your view to the rear is unobstructed!
• Before and while driving backwards, always check the area behind you by looking backwards.