Operating & maintenance manual 12.4 Soil compaction by means of the smooth roller drum 12.4.1 Surface soil compaction Release the parking brake by means of the switch ( 3 ). The corresponding symbol on the dashboard goes out. Make sure that the vibration type selector switch ( 2.1 ) is in the middle position ( 0 ) – OFF . On the joystick ( 1 ), push the red button ( 1.3 ) to set the diesel engine speed to drum operation. Press down the front of the vibration type selector switch ( 2.1 ) to activate surface compaction at a low amplitude ( L ). Move the joystick ( 1 ) forward or backward, depending on the desired direction of motion.
The symbol indicating the direction of motion lights up on the dashboard. In order to activate roller vibration, push the red button Vibration on / off ( 1.1 ) on the joystick ( 1 ). The compaction roller starts to move in the desired direction of motion and performs surface soil compaction. L Fig. 71 Surface soil compaction 12.4.2 Deactivating surface soil compaction To stop the surface compaction process, push the red button Vibration on / off ( 1.1 , see illustration above) again. The vibration is deactivated. However, the previously selected type of vibration remains preselected. In order to stop the compaction roller, move the joystick ( 1 ) back to the neutral (middle) position.
Set the Diesel engine to idle speed by pushing the green button ( 1.4 ). Apply the parking brake. The symbol on the dashboard lights up. 5 1.4 Fig. 72 Deactivating surface soil compaction 61 NOTICE Measures to be taken prior to driving! The compaction roller needs to be ready for operation with the Diesel engine started and running at operating temperature (see Starting, driving and stopping the compaction roller). SAFETY Obligation to inform yourself! For surface compaction on slopes, see Driving on heavy soils and on slopes. INSTRUCTIONS DANGER In any emergency which requires you to stop the compaction roller at once, press the emergency stop push-button (5).