hyundai — 8067024 pf2510 EN 03 17

Operating & maintenance manual 12.4.3 Deep soil compaction Proceed as described above, in the section on surface soil compaction. Push the red button ( 1.3 ) on the joystick to set an appropriate engine speed for roller operation. Press down the back of the vibration type selector switch ( 2.1 ) to set it to deep soil compaction at a high amplitude ( H ). Move the joystick ( 1 ) forward or backward, depending on the desired direction of motion. The symbol indicating the direction of motion lights up on the dashboard. In order to activate vibration, push the red button Vibration on / off ( 1.1 ) on the front of the joystick ( 1 ).

The compaction roller starts to move in the desired direction of motion and performs deep compaction. H Fig. 73 Deep soil compaction 12.4.4 Deactivating deep soil compaction In order to deactivate the deep soil compaction mode, push the red button Vibration on / off again ( 1.1 ). Vibration stops. However, the previously set type of vibration remains preselected. Move the joystick ( 1 ) back into the neutral (middle) position to stop the compaction roller. Push the green button ( 1.4 ) on the joystick to set the Diesel engine speed to idling. Apply the parking brake ( 4 ), which causes the corresponding symbol on the dashboard to light up. 1.1 5 4 1 1.4 Fig.

74 Deactivating deep compaction 62 SAFETY INSTRUCTIONS Obligation to inform yourself! For deep soil compaction on slopes, see Driving on heavy soils and on slopes. DANGER In any emergency which requires you to stop the compaction roller at once, press the emergency stop push-button (5). DANGER In any emergency which requires you to stop the compaction roller at once, press the emergency stop push-button.