Operating & maintenance manual 12.5 Soil compaction with the pad foot drum 12.5.1 Basic information on the fields of application of the pad foot drum Using the pad foot drum always requires vibration and serves the following purposes: compaction of cohesive soils and mix soils containing a high concentration of water compaction of schistous soils and brittle rock as well as particle size reduction mixing hydraulic binders into the soil in order to stabilize the soil The rolling speed should be between 30-60 m/min (33 to 66 yards/min) , i.e. approx. 1.8-3.6 km/h (1.1 to 2.2 mph). .
In case a high concentration of moisture is encountered, perform three compaction passes and allow several hours for the soil to dry prior to compacting it further. As for compacting cohesive soils and mix soils, the progress of the compaction is indicated by the increasing ascent of the pad feet in the soil until they finally penetrate it only lightly. As soon as the desired degree of compaction has been achieved and no new layers will be added, the compacted surface must be rolled by means of a smooth drum to prevent the top layer from being soaked by rain. In addition, the surface should be slightly inclined to render it possible for water resulting from precipitation to drain. Fig.
75 Pad foot drum See Working with the compaction roller for information regarding operation with a pad foot drum. 63