hyundai — 8067024 pf2510 EN 03 17

Operating & maintenance manual 13 Compaction measurement (Optional feature) If your compaction roller is equipped with a compaction measurement device (optional feature), the oscillation and acceleration of the drum are measured. The respective values are established by a sensor ( 1, see photo below) and forwarded to a computer. The computer transfers the values to a display ( 2 ) in the cab. The representation on the display enables the driver to inform him-/herself of the current values concerning the degree of compaction and vibration at all times. 13.1.1 Variants of the compaction measurement system The system is available in two optional variants: Variant 1:

Display and printing of the compaction data only Variant 2: Display of the compaction data and recording for subsequent analysis / printouts 13.1.2 Advantages of compaction measurement The information retrieved by the compaction measurement system ( 2 ) enables the driver to better assess (and possibly reduce) the amount of passes required to attain a certain result in a specific environment. Thus, time and fuel can be saved as well as unnecessary wear and tear avoided. The compaction results are not worsened by carrying out more passes than required any more.

Potential problems due to certain characteristics of the soil or the material are detected and adequate measures can be taken to prevent them. The compaction roller may be operated in locations where area-wide compaction measurement for construction work is mandatory. 1 2 Fig. 76 Compaction measurement 64 NOTICE  The compaction measurement system establishes values and provides information on the degree of compaction.  It does not interfere with the operational processes of the compaction roller.