Operating & maintenance manual 13.1.5 Compaction measurement system, variant 2: Display & recording In addition to displaying the current information regarding vibration and compaction, this type of measurement system is able to gather, record and save all the respective information available, once operation of the vehicle has started. The memory capacity allows you to record approx. a week’s operation data at construction sites. The data is recorded per track, which ensures reliable recordings even for complex construction measures and intricate maneuvering. The data thus retrieved can be transferred to a personal computer and evaluated by means of the corresponding software.
Analysis and evaluation of the data The data of the entire construction project can be graphically displayed and printed as an overview. Areas of the image that contain values which are smaller than a set default value are marked in red. The overview can be gradually enlarged in order to represent certain parts in greater detail. The overview can be gradually enlarged in order to represent certain parts in greater detail. Not only can each compaction roller track be marked separately, but it is possible to display and print the individual tracks as line diagrams. With the aid of a movable cursor, the compaction results achieved by different tracks and passes can be compared.
The compaction values can easily be calibrated with the results of selective standard test runs. 66 NOTICE From an economic point of view, the most relevant advantages of compaction measurement with storage function are: quality enhancement of the operation as a result of controlled compaction and the comprehensible documentation of the compaction results both for the building contractor and the client.