hyundai — 8067024 pf2510 EN 03 17

Operating & maintenance manual 20 Maintenance certificate B: At intervals of 100 operating hours 20.1 Maintenance work referring to the Diesel engine After the initial operation, the first inspection of the engine needs to be conducted after 50 operating hours, unless stated otherwise in the operating manual of the Diesel engine manufacturer. 20.1.1 Checking the water-fuel separator The fuel is cleaned and water is filtered from it before it reaches the diesel engine. The water-fuel separator (which is a part of the preliminary fuel filter) needs to be checked. 3 The preliminary fuel filter / water-fuel separator ( 3 ) can be found on the left side, at the back of the engine.

Drain the preliminary fuel filter/ fuel-water separator ( 3 ). Fig. 103 Preliminary fuel filter / Water-fuel separator 20.1.2 Cooling system To be carried out if the warning lamp lights up or after repair work: Check the coolant level. If coolant needs to be added: Carefully screw off the lid of the coolant receptacle. Check the coolant level. If coolant needs to be added or after repair work, the following mixing ratio is required: Capacity of the cooling system: approx. 15 liters. Mixing ratio: 0.5 liter of water and 0.5 liter of coolant per liter (i.e. water: 50% / coolant: 50%) Fig. 104 Coolant level 89 SAFETY Obligation to inform yourself!

Please refer to the operating and service manual(s) of the Diesel engine manufacturer for information on maintenance work / intervals related to the Diesel engine. INSTRUCTIONS WARNING Risk of burns caused by hot coolant! Before you open the lid of the cooler, make sure that the Diesel engine and the cooling system have cooled down.