Komatsu — BEFORE STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS Check Fuel Level, Add Fuel WARNING After checking, turn the switch back to the OFF position. 3 - 114 When adding fuel, never s pill the fuel or let it overflow. It will c If any fuel has spilled, wip e it up completely. If fuel has spilled over soil or sand, remove that soil or sa Fuel is highly flammable a nd dangerous. Never bring flames n 1. Turn the engine sta rting switch to the ON position and check (1) on the monitor panel for fue 2. If the level is low, o pen the mud cover, open fuel fill er cap (F) of the fuel tank, the highest position. Specified fuel amou Position of tip of floa mm (4.1 in) from to 3.

After adding fuel, pu n add fuel until float gauge (G) ri ses to the nt in fuel tank: 125 liters (33.03 US gal) nt in fuel tank: 125 liters (33.03 t gauge (G) when tank is full: Ap prox. 105 p surface of fuel tank sh float gauge (G) straight down with fuel filler cap (F). Be car tab of fuel filler cap eful not to get float gauge (G) ca ught in the (F), and tighten fuel filler cap (F) securely. REMARK If breather hole (3) on th e cap is clogged, the pressure i n the tank will drop and fuel will no t flow. Clean the hole from time to time.