Komatsu — BEFORE STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS REMARK the tank. NOTICE 5. Move plate (3) to the center of the cap, then secure with bolt (2). 6. Close mud cover (1). 3 - 116 The oil level will vary depe nding upon the oil tempera Accordingly, use the follow Before operation: aroun Oil temperature 10 to 3 Normal operation: arou Oil temperature 50 to 8 4. on right, extend the boom s fully, t hen remove the oil filler cap , and install the cap again t o pressurize Be s ure to pressurize the hydr aulic tank. If it is not pressuriz ed, the p ump will suck in air, and this will a dversely affect the equipment. Check Dust Indicator 1. Open the engine hood appeared in the portio arrow. 2.

If the red piston has a immediately. For details of the m "CHECK, CLEAN AND (PAGE 4-18)". 3. After checking, cleanin press the knob of dust i original position. and check that the red piston has not n of dust indicator (1) marked by the ppeared, clean or replace the element ethod of cleaning the element, see 1. 2. 3. appeared in the portio arrow. If the red piston has a immediately. For details of the m see "CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT (PAGE 4-18)". After checking, cleanin g, or replacing the air cleaner element, press the knob of dust i ndicator (1) to return the red piston to its original position.