Komatsu — BEFORE STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS Check Electric Wiring CAUTION 3 - 122 trace distributor to locate t he cause and make the repair Keep the top surface of the battery clean and chec k the breather hole in the battery cap. If it is clogg ed with dirt or dust , wash the battery cap to cle Check that there is no damage to the f uses; tha t fuses of th e specified capacity are used; that there is no disconnection or trac e of short-circuiting in the e lectr ic wiring and no damage to the covering . Check also that there is no loosened termin als. If any, tighten them. Moreover, pay partic alternator. Be sure to check tha immediately.

material accumu Check Working Lamp Switch Check that the workin g lamps and lamps i nside the instruments light up properly. Check a lso that there is no dirt or damage. any lamp does not If distributor to carry ou 1. Turn the starting switch to the ON position. 2. Turn the lamp sw itch ON (night mode (a), and e working lamp lights Check Function of Ho rn switch to the ON position. horn sounds immediately when the hor . 1. Turn the starting 2. Confirm that the button is pressed If the horn does n repair. 1. Turn the starting switch to the ON position. 2. Confirm that the ot sound, contact your Komatsu distributor fo