. OPERATION MACHINE OPERATIONS AND CONTROLS Adjustment WARNING (B) Adjusting reclining upright that is 3 - 123 Adjust the seat position b efore starting operations or after ch anging the operator. Adjust the seat so that th e control levers and switches can b e operated freely and easily with the operator back against the backrest. Seat Adjustment (A) Fore-and-aft adjustme Pull up lever (1). After the s eat is set to the desired position the lever. Adjustable distance: 50 m REMARK The seat can be reclined m ore when the seat is pushed to t The amount of reclining d ecreases as the seat is pushed when moving the seat b position.
Pull up lever (2) and s et the backrest to a position comfortable for operation, Sit with your back against the seat backrest when adjustin back is not against the ba ckrest, the backrest may sudden forward. (C) Adjusting armrest ang le to spring up by hand approx. 90°. Armrest (3) can be made to spring up by hand approx. 90 In addition, by turning the dial (4) at bottom of armrest by hand it is possible to make fin e vertical adjustment of the armrest angle. : 50°. Armrest adjustment angle REMARK If the seat back is tipped t o the front without raising the a rmrest (3), the armrest will rise (D) Overall fore-and-aft ad justment of seat Move lever (5) to right.
Aft er the seat is set to the desired position, release the lever (5). In this case, the operator's seat, left and right control levers, and lock lever all slide t Adjustable distance: 100 (E) Adjusting suspension There are numbers on the weight scale of dial (6). Turn dial (6) until the value for your The weight can be adjust ed to 50 to 120 kg (110 to 265 l b). If you want to make the se at softer, turn the weight adjustm ent to a lower weight; if you wa nt to make the seat harder, adjust to a higher weight. When operating on uneven sur faces, adjust the seat to a har der setting.