. OPERATION MACHINE OPERATIONS AND CONTROLS Rearview Mirrors WARNING 3 - 124 Be sure to adjus t the mirrors before s tarting work. If they ar e not adjusted properly, you cannot secur e the visibility and m ay be injured or may i njure someone seriou Mirror (A) ror mount so that it is possible to see people at the machine. Adjust the mir rear left of the Install the s ide view mirror in th e location i ndicated in th e figure at right. m (6.7 in) securing stay (1) the way the side view mirror utward to the maximum. does not move smoothly when adjusting its angle, (E):
170 m Fix mirror stretches o utward to the maxim If the mirror does not move sm n adjusting it s angle, loosen mirror fixing bolt (2) and Tightening torque of bolt (2): 1 (1 loosen mirr or fixing bolt (2) and stay mounting bolt Tightening torque of bolt (2): 1 5.7 - 19.6 N .6 - 2.0 kgm , 11.6 - 14.5 lbft) When adjus ting the side view m irror angle, make a n adjustment so that the s ide of the machine comes into view on the m irror as shown in th e figure at right. ee peopl