Komatsu — MACHINE OPERATION

. OPERATION MACHINE OPERATIONS AND CONTROLS in the FREE position (F), work equipment, and raise it 40 to 50 cm (16 to 20 the ground. or by 3 - 145 Moving Machine Fo 1. Set lock lever (2 the in) 2. Raise the blade. 3. Operate right and left travel control le vers (3) or righ t and le ft travel pedal s (4) in the follow When sprocket (A) is situated at the re ar of th e machine; Start the machine e ither by pushing le ver (3) f orward slowly b y stepping on the front part of pedal ( 4) slowl When sprocket is s ituated at the front of the m achine ; Start the machine either by pulling lev er (3) b lowly. ack slowly slowly stepping on the rea r part of pedal (4) s 4.

Check that the tra vel alarm sounds p roperly. If the t ravel al arm does not s ound, please co ntact your Ko matsu distributor for repa ir. REMARK if the machine travel speed is not normal, thoroughly perform the warming-up operation. In cold temperatures, if the machine trav el speed is not normal , thoroughly pe rform the warmi ng-up operatio In addition, if the unde rcarriage is clogged with mu d and t he machine travel spe ed is not normal, remove the s oil and mud from the underca rriage.