Komatsu — MACHINE OPERATION

. OPERATION MACHINE OPERATIONS AND CONTROLS in the FREE position (F), fold the work equipment, and raise it 40 to 50 cm (16 to 20 in) from the ground. 3 - 146 Moving Machine Bac 1. Set lock lever (2) i 2. Raise the blade. 3. Operate right and le ft travel control levers ( 3) or righ t and l eft travel pedal s (4) in the follow When sprocket is situ ated at the rear of the machine; Start the machine eit her by pulling lever (3) stepping on the rear p art of pedal (4) slowly. When sprocket (A) is situated at the front of the machine; Start the machine eit her by pushing lever (3 ) forward slowly b y stepping on the fro nt part of pedal (4) slo wly. 4.

Check that the trave l alarm sounds properl y. If the t ravel al arm does not s ound, please co ntact your Ko matsu distributor for repair. REMARK he machine travel speed is not normal, thoroughly perform the warming-up operation. In cold temperatures, if t he machine travel spe ed is not normal , thoroughly pe rform the warmi ng-up operati In addition, if the underc arriage is clogged with m ud and t he machine travel spe ed is not normal, remove the s oil and mud from the undercarri age.