. OPERATION TRANSPORTATION OPERATION TRANSPORTATION 3 - 180 6. machine from moving during machine with chains or wire r Be particularly careful to secu re the machine in position so that it does not slip to the side. When securing the machine, put blocks between the wire rope and the machine to prevent d amage to the rope or machine. Unloading 1. Load and unload on firm lev distance from the edge of a r 2. Apply the trailer brakes secur tires to prevent the trailer fro Set left and right ramps equally spaced to the left a Make angle of installatio ramps bend a large am machine, put blocks unde bending. el ground only. Maintain a safe oad. 1. distance from the edge of a r 2.
Apply the trailer brakes secur ely, then put blocks (1) under the tires to prevent the trailer fro m moving. (2) parallel to each other and Set left and right ramps nd right of center (3) of the trailer. n (4) a maximum of 15°. If the ount under the weight of the r the ramps to prevent them from 3. Remove the chains and wire 4. Start the engine. Warm the engine up fully. 5. Set the lock lever to FREE p