. OPERATION TRANSPORTATION OPERATION TRANSPORTATION speed monitor (6). NOTICE 3 - 181 6. lamp li Pres d. The travel speed (L o, Hi) is displayed on the travel 7. Turn a uto-deceleration switch (7) OFF and operate the fuel control Eac switc Whe auto control Eac dial to set the engine sp h time auto-decelerati eed to low idling. on switch (7) is pressed, it in turn. witch (7) is turned OFF, the ) goes out. hes OFF J ON J OFF Whe n auto-deceleration s -deceleration monitor (8 8. then m ove the machine slowly. 9.
When t he machine is horizontal on top of the rear wheel s of the trailer, the boom, angle of 9 If the mac hine is unloaded with the arm pulled in, it will cause damage to the ma When mo ving onto the ramps, do no t thrust the bucket into the ground. This will cause damage to the hydra 10. When moving from the rear of the trailer on to the ramps, set the ang le of the arm and boom to 90° to 110°, lower the bucket to the g round, then move the m achine slowly.