. OPERATION TRANSPORTATION LIFTING MACHINE WARNING NOTICE 3 - 183 T he opera tor carrying out the l ifting operation u sing a c rane must be a properl y qualified crane ope N ever rais e the machine with a ny worker on it. A lways m ake sure that the wire rope is of ampl e strengt h for the w eight of this When liftin g, keep the machine When carr ying out lifting opera tions, set the lock lever to the LOCK position to pr event the machine fr om moving unexpectedly. N ever go i n the area under or a round the machine when it is raise T here is a hazard that the mac hine may lose its balance.
A lways us e the posture given i n the procedure below an d use the proper l iftin g equipment to lift th This method of lifting applies to t he standard specification machine. The method of lifting differs acco rding to the attachments and option For details of the procedure for m achines that are not the s tandard s pecification, please consult your For weight, see "SPECIFICAT IONS (PAGE 5-2)". When lifting the machine, carr y out the operation on flat groun d as follow 1. Start the engine, then swing the upper structure so that the work equipment is at sprocket (1) end with the track frame and upper structure set parallel. 2.
Extend the bucket cylinder and arm cylinder fully, then lower the work equipment to the ground as shown in the diagram on the right using the boom cylinder. 3. Lower the blade to the ground. 1. Start th e engine, then sw ing the upper structur e so that the work eq uipment is at sproc ket (1) end wit h the tra ck frame and upper s tructure set paralle l. r and arm cylinder fully, then lower 2. Extend the bucket cylinde wer the wor k equipment to the ground as shown in th e diagram on the righ t using the boom c 3. Lower t he blade to the gro 4. Set the lock lever securely to the LOCK position 5.
Stop th e engine, check th at there is nothing arou nd the o perator's co mpartment, then g Close th e cab door and fr ont glass securely.