. MAINTENANCE MAINTENANCE PROCEDURE REPLACE RUBBER SHOES (Machine equipped with rubber shoes) WARNING Prepare a grease pump Prepare a steel pipe Rubber Shoes Removal WARNING 1. Raise the chassis with the boom and arm. When doing this, operate the levers slowly. 4 - 32 Carry out this operation with t machine in accordance with th wo workers. The operator must move the e signals from the other worker. The rubber shoes are repla extremely dangerous if the m replacement operation.
Durin the rubber shoe track except t In addition, never go under or p shoe or track frame during the ced with the machine raised, so it is achine is lowered by mistake during the g the replacement operation, never move he rubber shoe track to be replaced. ut any part of your body under the rubber replacement operation. There is danger of the plug fly ing out under the high internal pressure of the grease. When loosen pl Never loosen any part other t with the mount of plug (1). If the track tension is not reliev Komatsu distributor. ug (1), never loosen it more than one turn. han plug (1).
Never put your face in line ed by this procedure, please contact your NOTICE It is possible to change from the r ubber shoe to the road liner and steel shoe. However, it is necessary to r emove the idle r guard and to carry out adjustment, so a lways contact your Komatsu distributor to have the rep lacement carried out. It is extremely dangerous to re lease the grease by any method except the procedure g If the rubber shoe tension is n ot relieved by this procedure, please contac t your Kom atsu distributor fo Check that all the grease has been released before rotating the sprocket t o remove th e rubber shoe.