. MAINTENANCE MAINTENANCE PROCEDURE REPLACE FUEL PRE-FILTER CARTRIDGE (MACHINE OF POOR FUEL ARRANGEMENT SPECIFICATION) WARNING position (S). 4 - 69 After the engine has bee n operated, all parts are at high t emperature, so do not replace the filter i mmediately. Wait for all parts to cool down before sta rting the operation. ted inside the engine fuel piping system when the engine is running. High pressure is genera ted inside the engine fuel piping system when t When replacing the filte r, wait for at least 30 seconds a fter stopping th e engine to let the inter nal pressure go down before replacing the filter. flame close.
Do not bring any fire or NOTICE Genuine Komatsu fuel f ilter cartridges use a special filt er that has hig hly efficient filtering abil ity. When replacing the filter cartridge, always use a genuine Komatsu part. The common rail fuel in jection system used on this ma chine c onsists of more precise parts th an the conventional injection pump and nozzle. If any part other than a g enuine Komatsu filter cartridge is used, dust or dirt may get in and caus e problems with the injection system. Always avoid u sing substitute parts. When carrying out insp ection or maintenance of the fue l system , pay m ore attention than norm al to the entry of dirt.
If dirt is stuck to any part, use fu el to wash it off completely. Prepare a container t Prepare a filter wrenc 1. Open the inspection cover. 2. Set valve (1) at the s ide of the fuel pre-filter cartrid ge to th e shut 3. Open the engine ho od. 4. Set the container to catch the fuel under the pre-fi lter cartridge. 5. Loosen drain valve ( the transparent cap 2), then drain all the water and sediment in (3) and also the fuel accumulated in filter cartridge (4). 6. Using a filter wrenc h, turn transparent cap (3) to the left to 7. Using a filter wrenc h, turn cartridge (4) to the left to remove it. 8. Install transparent c ap (3) to the bottom of the ne w filter cartridg e.
(When doing this, always replace O-ring (5).)