Komatsu — EVERY 4000 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE time. REPLACE ACCUMULATOR (FOR CONTROL CIRCUIT) WARNING the the a failure on the machine. Please ask your Komatsu distributor to replace the accumulator. 4 - 91 EVERY 4000 HOU Carry out the EVERY 100 HOURS MAINTENANCE , EVERY 2 50 HOURS MAINTE NANCE, EVERY 50 0 HOURS MAINTENANCE, EVE RY 1000 HOURS MAINTENANCE, and EVERY 2000 HOUR S MAINTENANCE a t the same CHECK WATER PU Check that there is no play in the pulley, leakage of oi l or water, o r clogging of the dra in hole.

If any proble m is found, please contact your K omatsu distributor for repairs or replacem Replace the accumula tor every 2 years or every 40 00 hours, w hichever comes so The accumulator is charg ed with high-pressure nitrogen g as, so mista ken operation may cau se an explosion, which will lead to serious injury or damage . When handling the accumulator , always do a s follows. The pressure in the hy draulic circuit cannot be complet ely removed . When removing the hydraulic equipment, d o not stand in the direction that th the operation. e oil spurts out when carrying out the operatio n. In addition, loosen the bolts slowly when c arrying out e accumulator. me or dispose of it in fire.

t or weld it. subject it to any impact. Do not disassemble th Do not bring it near fla Do not make holes in i Do not hit it, roll it, or When disposing of th e accumulator, the gas must be released. Ple ase contact your Kom atsu distributor to hav e this work carried out. If operations are c ontinued after the performance of t ped, it will be impossible to release t the hydraulic circuit if there should be accumulator has drop remaining pressure in The accumulator is ins talled to the position shown i n the diagra on the right.